HFX BorgFX VGA (521)

The new BorgFX VGA heatpipe cooler has some major improvements to ensure highest cooling performance also with newest models of graphic cards: > nickel coated copper block > low height of 18mm, which reduces distance to next slot card > backside mounting plate for prevent the card from bending > you can extend the BorgFX® VGA with additional heatpipes The BorgFX® VGA transports the heat from the graphic card with 2 heatpipes to the left heatsink. The active cooling has to be removed from the VGA card and the BorgFX® VGA has to be mounted with the 2 holes of the VGA card. Due to the flexible heatpipe plug-in system most kind of VGA cards are supported (if they have a 2 hole mounting): > AGP cards > PCI-Express cards > SLI cards For SLI cards 2 Borg HGC are required. For Graphic cards lower then X800 you can also use BorgFX Bridge. Specification: Mounting hole distance: 54mm or 72 to 80mm Copper block: 38*30*7mm Heatpipe adapter: 35*30*5mm Heatpipes: Copper, diameter=6mm, 90° bended Total height: 18mm Specification Heatpipes: material: pure Copper max. heat transfer rate: 33W thermal resistance: 0.08°C/W working temperature: 30~120°C crack temperature: 280°C working fluid: deionized water wick structures: sintered powder metal surface finish: nickel plated For double the amount of heatpipes and the cooling performance, please extend with BorgFX Extension. Package contents: GPU copper heatsink (nickle coated), 4 bended heatpipes (diameter of 6mm), 6 heatpipe plates, 2 mounting plates (for front and back side), screws