Počítačový zdroj THERMALTAKE ToughPower XT 575W 80plus BRONZE (TPX-575M)

- Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.91 standards. • - 24/7 @ 50 ? : Guaranteed to deliver 575W continuous power. • - Double-forward switching circuitry: compared with traditional circuitry, double-forward switching circuitry offers low power loss and high reliability. • - Unparalleled DC to DC converters for 3.3V and 5V outputs to reach high efficiency. • - High quality Japanese capacitors: ensure superb performance and reliability. • - 105 ° C (221 ? ) s olid state capacitors: great stability at higher operating temperatures, frequencies and currents. • - 80 PLUS Bronze certified – provide up to 89% effective power conversion to cut-down electric cost. • - S.P.T. Indicator: PSU status monitor with 3-mode LED ( standby / PG signal / temperature). • - Fan Delay Cool Technology: allows 14cm fan to continue to operate 15-30 sec after system shuts- down to ensure all components are properly cooled. • - 12Vin1: single +12V rail design providing up to 48A. • - Multi-GPU ready: 1 x PCI-E 6+2pin & 1 x PCI-E 6pin for PCI-Express graphic cards. • - Active Power Factor Correction (PFC) with PF value of 0.95 at full load. • - Auto switching circuitry for universal AC input from 90-264V. • - High reliability: MTBF>120,000 hours. • - DIMENSION: 5.9”(W) x 3.4”(H) x 6.3” (L);150mm(W) x 86mm(H) x 160mm(L) • - Built-in industry grade protections : Over Current, Over Power, Over Voltage, Under Voltage, and Short- Circuit protection. • - Safety / EMI Approvals: UL/CUL, FCC, TUV, CE, BSMI, and GOST certified. GENERAL INFO P/N TPX-575M Type Intel ATX 12V 2.3 & EPS 12V 2.91 Max. Output Capacity 575W Peak Output Capacity 675W Color Black Dimension ( W / H / D ) 150mm(W) x 86mm(H) x 160mm(L) PFC (Power Factor Correction) Active PFC Power Good Signal 100-500 msec Hold Up Time 15msec (minimum) at 80% of full load at 230Vac input. AC INPUT Input Current 115Vac / 8A max. 230Vac / 4A max. Input Frequency Range 47 Hz ~ 63 Hz Input Voltage 100 VAC- 240 VAC ENVIRONMENTAL Operation Temperature 0? to +50? Operating Humidity 20% to 90%,non-condensing Storage Temperature -20 ? to +70 ? Storage Humidity 5% to 95%, non-condensing Cooling System 140mm dual ball bearing Fan:1900 RPM ± 10% MISCELLANEOUS Efficiency 82% ~85% at full load (typical) and 115Vac input. Up to 89% at 230V Input. MTBF 120,000 hrs minimum Safety Approval UL/CUL, FCC, TUV, CE, BSMI, GOST