Řada Revolution DUO je postaven na základě tunelové kontrukce. Přívod vzduchu na zadní straně napájecího zdroje generuje proud vzduchu pro tunel. Ve srovnání s jedním ventilátorem PSU dvojí konstrukce ventilátoru odklání proud vzduchu aktivně a poskytuje vyšší výkon chlazení. Inteligentní řízení ventilátoru optimalizuje oba ventilátory a zaručuje tichý provoz i při 100% zátěži. Řídicí FMA umožňuje ručně zvýšení chladicího výkonu napájecího zdroje a pro rozptýlení tepla z komponent systému.
Product Introduction
The Revolution DUO series is built for cases with tunnel design. Air intakes at the back side of the PSU generate extra air stream in the tunnel. In comparison to single fan PSUs the dual fan design diverts the airflow actively and provides a higher cooling performance. The intelligent fan control optimizes both fans RPM to guarantee a silent operation even at 100% load. The FMA control allows to manually boost the cooling performance of the PSU and to dissipate heat from system components.
80 PLUS® Gold
Up to 92 percent efficiency at 230V and 20 to 100 percent load. 80 PLUS® Gold certified.
Support of EU Eco-Design Regulations
The Revolution DUO Series helps systems to meet the latest EU eco-design directive ErP Lot 6 2013 (< 0.5W in standby mode*) due to a high-efficient 5V standby (+5Vsb) circuitry as well as the EU regulation no. 617/2013 demanding amongst others 85% efficiency at 50% load and 82% at 20% and 100% load.
* only in combination with an ErP Lot 6 2013 ready mainboard
DC-to-DC Design
The secondary voltages (+5V and +3.3V) are generated by the primary voltage rail (+12V). Positive effect: Higher efficiency, clean output voltages (low ripple & noise) and a perfect voltage regulation at all loads.
Zero Load ready!
Supports the C6/C7 energy-saving functions of the latest Intel® CPUs incl. the Intel® Haswell™ and Skylake™ generations.
Full GPU & CPU Power
Massive 12V rail to power high-performance and overclocked processors and graphics cards.
Air Cooling by Enermax
The integrated 10cm (intake) and 8cm (exhaust) fans with patented Twister Bearing Technology ensure an efficient and continuously silent cooling and long lifetime.
DUO FLow™ Design
In comparison to single fan PSUs the dual fan design diverts the airflow actively and provides a higher cooling performance. Air intakes at the back side of the PSU generate extra air stream in a tunnel design case.
FMA Control
Patented FMA (Fan-speed Manual Adjustment) technology allows users to manually adjust the fan RPM to increase airflow from the fans of the PSU to provide extra cooling for the system when needed.
Sleeved Cables
The sleeved cables of the Revolution DUO not only provide an optical highlight, but also protect the cables from damage.
Multi-GPU Support
Two 6+2P (8P) PCI-E connectors (500W and 600W) or four 6+2P (8P) PCI-E conntectors (700W) to power the latest high-end graphics cards and multi-GPU systems.
SafeGuard
Multiple protection circuitry of OCP (5V/3.3V), OVP, UVP, OPP, SCP and SIP ensures your system safety.
Intel ATX 12V v2.4
Compliant with the Intel Power Supply Design Guide for Desktop Platform Form Factors Revision 1.31 April 2013.
Worldwide Compatibility
Automatic 100-240V AC input for global usage and up to 99% active Power Factor Correction (PFC).
Included in the delivery
Revolution DUO power supply
Cable ties
AC Cord
4 screws
User Manual
